Rack Mount Power Supplies
AC-DC
120/240 VAC Input
12, 24, 48 VDC Output
150-1000 Watts
Rectifiers
Battery Chargers
Power Modules
Power Management
Power Supplies
Rack Mount
Wall Mount
Desktop
Rack Mount Rectifiers and Management Components
Centri Series HE1U/HE1U-MU
Input: 90-264 VAC
Output: 13.8, 27.5 or 56 VDC | 5, 10, 12, 20, 25, 50 or 100 Amps
The high efficiency HE1U series DC power supply is designed to provide maximum power in a small package. These high power density units are only 1RU high and 14” deep, yet are able to provide up to 1500 watts from a single AC power outlet. Built into our sturdy chassis with 1⁄4 inch output studs and a terminal strip for DC-OK and internal power supply remote On/Off control.
ControlWave Power System
Input: 90-264 VAC
Output: 12, 24 or 54 VDC | 70, 140 or 200 Amps | 2400 / 3360 Watts
ControlWave is an innovative remote power system with integrated power monitoring, control and distribution that delivers power, reliability and robust control in a compact package. Available in 12V, 24V, and 48V models, ControlWave is designed to provide maximum power in a small package. With integrated power distribution, ContolWave provides 12 fully programmable load circuits which manage the flow of current in each circuit. These ControlGates can be configured for values from 1 to 40A in 50mA increments and can be controlled remotely. This unit provides real-time power monitoring for connected devices locally and over the Ethernet through an integrated web server.
Integrated Power Systems
Input: 115/230 VAC
Output: 12, 24, or 48 VDC
11 – 40 Amps with Internal Battery
The Integrated Power System (IPS) is a unique multifunction power supply which incorporates built-in battery back-up and numerous power accessories within a single 2RU (3.5″) chassis, thus eliminating time-consuming system integration, component sourcing and installation, while saving precious rack space–ideal for any low-to-medium power application requiring AC fault tolerant operation.
Mobile, Wall Mount, and Desktop Power Supplies
Power Supplies – Heavy Duty Series
Input: 115/230 VAC
Output: 12 or 24 VDC, 5 – 35 Amps
These super-rugged DC supplies are ideal for powering 12 and 24 volt communication equipment in base stations, remote sites and mobile communication applications where reliability is essential. The proven linear circuit design provides pure noise free output and long service life.
Power-Pac Series
Input: 115/230 VAC
Output: 12 VDC, 5 Amps
Battery Back-up: 7 – 14 A/H
This 12 volt, 10 amp power supply features built-in back-up batteries which are charged during normal operation and then continue to power radios when AC power is lost. Choose 7 or 14 amp-hour battery capacity.
Unity Stand-Alone Rectifier Series
Input: 115/230 VAC
Output: 24 or 48 VDC
3 – 6 Amps, 150 Watts
For applications that do not require rack-mounting or redundancy, the Unity is available as a stand-alone rectifier. A versatile flange permits a myriad of mounting options, such as on the side of rack rails, inside cabinets, on walls or under shelves, maximizing use of restricted spaces.
Emergency Relay/Charge – ERCs
The E.R.C. allows emergency battery tie-in to a radio system that is normally operated by a power supply.
Legacy Products
Power Module
Input: 120/230 VAC
Output: 12, 24 or 48 VDC, 560 – 2200 Watts
These versatile Rectifier Modules function as either power supplies or battery chargers for 12, 24 or 48 volt systems; positive, negative or floating ground. They may be employed singly or in combination, enabling the installer to scale the system anywhere from 500 to 10,000 watts per rack. Units may be paralleled for N + 1 redundancy and alarm contacts allow local or remote monitoring. An optional DC quick connect wiring kit allows easy replacement of modules without system shutdown.
Power Function Manager
Input: 12, 24 or 48 VDC
Total Current Capacity: 500A
The Power Function Manager is a system integrating component which converts ordinary power supplies (or Power Modules) into a fully integrated and multifunctional power system. The unit provides for control, monitoring, paralleling and protection of 12, 24 or 48 VDC, positive negative or floating ground power sources.