ABC Series Battery Charger

The ABC 12-6 charger produces 3 step output (bulk, absorption, and float) to 2 isolated battery banks providing fast recovery and ideal cell conditioning which maximizes battery performance and life. Its rugged heat sink case utilizes convection rather than forced air cooling, thus dust and moisture are not introduced inside the unit making it ideal for vehicles which have an intermittent demand for battery power.

(For battery systems which require high continuous output, see our Phase Three Chargers)

 

 

newmar powering the network battery charger abc-12-6

Features

  • Total output ammeter
  • Dual output banks
  • On-off switch and power “ON” indicator light
  • Vibration absorbing mounting grommets
  • Anodized aluminum case
  • 115/230 VAC input selector switch
  • Auto-reset thermal overload protection
  • Conformal coating of circuit board
  • Convection cooled case, no fans. Ideal for high moisture enviroments

Specifications

Model Input Amps Output Dimensions Weight
@ F. L. Volts Banks Amps (H x W x D)
ABC 12-6 5/2.5 90-130 VAC or
180-264 VAC, 50-60Hz
12 2 6 8″ x 6″ x 4.2″ 9 Lbs.

 

Typical Charge Curves – ABC Series

Newmar Powering the Network ABC series Battery Charger typical charging curve
Duty Cycle Ratings: Rated Charging Output 20 min., derate to 50% for continuous output

Operating Temperature: 0-40°C

Float Voltage: 13.4 VDC